How To Choose WPC And SPC Floors

SPC floor is the abbreviation of Stone Plastic Composites. It is extruded by an extruder combined with a T-die to extrude the SPC substrate, and use a three-roll or four-roll calender to separately heat the PVC wear layer, PVC color film and SPC substrate at one time Laminated and embossed, it is a truly zero-formaldehyde environmentally friendly product that does not use glue.

WPC is the abbreviation of Wood Plastic Composites. It is a floor made of sheet-like PVC composite decorative layer as the surface layer and wood-plastic composite foam material as the bottom layer.

Features of WPC and SPC floors

(1) 100% waterproof, suitable for use in any indoor area except outdoors;

(2) High environmental protection, 0 formaldehyde, food grade;

(3) The fire rating is B1, which is suitable for occasions with high fire protection requirements;

(4) High strength and wear resistance;

(5) Moisture-proof, anti-slip, mothproof, antiseptic and antibacterial;

(6) Comfortable foot feeling and good sound absorption effect;

(7) Simple installation and convenient maintenance;

(8) Reflect the real texture of wood, and adjust different colors according to needs;

(9) WPC floor is at the indoor temperature below 0 ℃, there is a risk of deformation; SPC floor is suitable for use in extremely cold (-20 ℃) to extremely hot (60 ℃) indoor spaces.

Comparison of WPC and SPC with other floors

1. High-strength locking system for easy installation

2. Back-attached high-grade silent and moisture-proof mat

3. Small flaws on the ground can also be installed

4. It can be installed without a lot of treatment on the floor

5. Suitable for places with relatively high temperature

6. Suitable for large-area paving without connecting strips

7. It can be installed in a room exposed to long-term sunlight

8. Good sound insulation effect

9. Completely waterproof and moisture-proof

10. No plasticizer

11. Zero formaldehyde

12. Impact resistance and surface resistance to heavy pressure

13. Applicable to direct drop quick installation system

How to choose WPC and SPC floors

(1) Look at the appearance: the surface is flat, no pollution and scratches, no obvious stains, clear patterns, and no damage;

(2) Look at the splicing: randomly select 2 boards, put them together without height difference, and no obvious gap in the middle;

(3) Peeling resistance: the floor is broken and pulled hard, and the surface decoration layer and the base material are not easily separated.